Pro Series Dual-layer Golf simulator Affect screen for a home consisting of Projection Affect Screen and the Archery Net
DIY golf simulators the use of these durable Affect screens with Archery Net designed and tested to resist Affect from the fast-moving golf balls.
Description:
- HD picture: It has a very tight and smooth surface, unlike other Affect screens that allow for a more crisp and clear HD image.
- Durability: The top screen is backed by a high-performance sports net providing extra durability.
- Finished Edges: The Net has grommets for easy connection with the frame.
- Cost-effective replacement: Easily remove the top layer (as the screen is connected with a sports net by anchor clamps) when worn for, as a cost-effective replacement.
- Noise cancellation: Less noisy, less bounce back.
- A great choice for commercial or high-usage setups.
Specification:
- Color: White
- Material: We use weft yarn material specifically designed to take the full Affect of a real golf ball.
Package Included:
- 12 x Frame Corners
- 1 x Pro Series Golf Simulator Projection Affect Screen
- 1 x Golf Archery Baffle Net
Note: If you wish to have to return items to us, there is a 15% restocking fee incurred and will be deducted from your refund once the returned items have been received.
- 1 x Pro Series Golf Simulator Projection Affect Screen
DIY golf simulators the use of these durable Affect screens with Archery Net designed and tested to resist Affect from the fast-moving golf balls.
The box frame is self-standing but can be fixed to the floor and/or rear wall the use of 1-inch diameter tube clamps. Please use a net or panel at the back of your golf Affect screen before use. The combination of screen and net results in long golfing experience.
You’ll be able to need 14 of the aluminium/ABS conduit tubing of 25mm outer diameter for the complete box frame.
The frame must be around 2 inches per side greater than the screen size. i.e. if the screen size is 12 ft x 9 ft (144″ x 108″) then the frame must be 12ft 4″ x 9ft 4″ (148″ x 112″).
If you find that the box frame is rather too small then you’ll extend the tubes an inch or two out of the fittings to suit. If the box frame is too large then the pipes should be cut down in length to suit. If required use pipe clamps to safe the lower half of the frame or floors and /or the back pipes to the wall.
